In preparation for the Museum’s current exhibition, Brushed With Light, conservators in the Paper Conservation Department examined over ninety watercolors. It was great to work on familiar works as well as those never examined or exhibited before. A common condition problem we observed during examination was the presence of unstable paint layers. Watercolors consist of pigments ground in gum arabic, a water soluble gum usually from the acacia plant, which holds or binds the pigment particles together and allows the color to be brushed onto a paper support. There are numerous causes for the paint to become unstable and lift away from the paper, including an insufficient amount or deterioration of the gum binder which can cause cracking and if left untreated, can result in paint loss. Some artists painted their images thickly, squeezing paint right out of a tube to create raised areas of paint called impasto. These areas are vulnerable to loss due to expansion and contraction of the paper and to a lack of adhesion to the paper. Some artists occasionally mixed additional gum into their paint, or as a glaze on top to add saturation to areas of flat color. With age these areas can become brittle and tend to crack and loosen.

In this photograph, I am consolidating lifting and powdery paint on the watercolor, The Samuel Fleet Homestead by Frances Flora Palmer, from the 1850s. The watercolor depicts a house which once stood at the corner of Fulton and Gold streets in Brooklyn and was reproduced in an 1884 publication, History of Kings County and Brooklyn by Stiles.

The piece was previously attached to a stretcher and in the image above you can see it was darkened in the central area where it was once exposed to light. It had been treated extensively in the past, but recent examination under magnification revealed areas of lifting paint where the artist used additional gum binder to enrich shadows in the trees and foreground, and to add dimension to the horses and some of the figures.

To consolidate, or re-adhere the loose pigment particles and flakes, I applied an adhesive using this ultrasonic mister. Most of the time consolidation is done with an adhesive introduced with a very small brush under the microscope under one paint flake at a time. The advantage of the mister is that the adhesive—in this case a photo-grade gelatin in ethanol and deionized water—is formed into minute particles which are smaller than the pigment particles. Because of their size they are easily absorbed into the pigment without changing the appearance of the paint layer and can be applied to a larger area at one time. This is an incredibly successful and useful technique for stabilizing powdery paint and small, light paint flakes as with this watercolor. In this case I am carrying out the treatment on a suction table which creates a downward pull to further enhance the absorption of the consolidant into the paper.
In my next post, we’ll go under the microscope to see the before and after effects of consolidation with an ultrasonic mister on another watercolor in the exhibition.

Author RSS 

RSS
Eastern Parkway/Brooklyn Museum
Can an ultrasonic mister be used to consolidate lose paint on an oil paint, as well? If so what kind of adhesive is used?
The ultrasonic humidifier works best for powdery, underbound paint layers where the mist can penetrate the paint from above and be pulled through it. In the Conservation lab at the Brooklyn Museum, we have used it for works of art on paper and for ethnographic, painted objects. Our paintings conservators have not yet used the Engelbrecht mister for consolidation of oil paints but our paintings conservator Carolyn Tomkiewicz refers you to the following article where an ultrasonic mister was used for this purpose: http://www.munch.museum.no/content.aspx?id=63&mid=&lang=en.
Hi Rachel, I am a paper conservator as well. I am in process to treat a watercolour by George O’ Brian which has areas of flaking white gouache. I was wondering, which consolidant did you use with the ultrasonic mister, and at what concentration? Thank you sincerely in advance.
Hi Elisabetta,
For consolidation, we have generally used a photo-grade gelatin (Talas in NY should have it, but not sure it’s exactly what I use.)
I generally use a 0.5% solution of the gelatin in deionized water, then dilute it in half with ethanol so it ends up as a 0.250% solution.
I try to humidify the area if possible first. It’s good to look at the piece in specular (or raking) light as you treat it to see how the consolidant is going into the paper support. We usually have to go over each area several times until it’s well adhered. We check it under the microscope. Sometimes we use funori, a mucilage from seaweed, to ‘cut’ the gelatin to lower gloss and strength which can be useful with powdery paints.
Hope this is helpful and thanks for your question,
Sincerely yours,
Rachel Danzing