- bloggers@brooklynmuseum - https://www.brooklynmuseum.org/community/blogosphere -
Advances in Exhibition Casework
Posted By Matthew Yokobosky On May 15, 2012 @ 1:49 pm In Design,Newly on View | 1 Comment
In my last post , I discussed the wall murals and the state-of-the-art photo enlargements in Connecting Cultures . Today, I’d like to talk about a few other firsts that make this a cutting edge Museum display.
Connecting Cultures is the first museum installation to utilize Optium for every vitrine and glazed surface. Optium is an anti-reflective, anti-static, abrasion-resistant and clear-coated acrylic produced by Tru Vue. Unlike regular Plexiglas glazings which mirror and reflect adjacent surfaces, these Optimum cases appear completely transparent. Optium has various coatings and is not easy to fabricate into 5-sided vitrines, but Allen Blum at Grewe Plastics had developed a fabrication method. The second challenge was that Optium is produced in very small quantities and when Allen contacted Tru Vue about our project, the President of Tru Vue personally called Allen to assure him that they would guarantee enough material to complete all 32 vitrines and glazing for the Pitcher Wall.
Working with Van Wood at the Small Corporation (SmallCorp), we were able to develop a new type of exhibition case for light sensitive materials using Smartglass as an electronic curtain for art. Smartglass is often used in architecture for privacy; it looks white or grey, but when activated it diffuses light or becomes transparent. Many people have also seen it used for unique applications, such as the dressing room doors at Prada in Soho. Smartglass is composed of two sheets of iron-free glass, with a 1/64″ film between that contains microscopic particles. When opaque, these particles are scattered; when electrified, the particles align vertically to allow light to pass through. At the Museum, our Conservation lab tested the Smartglass and found that when opaque it only allowed less than 1% of light diffusion, and less than 1% UV. For light sensitive works on paper and textile, these Smartglass curtains will extend the exhibition period of fragile works and do away with the need for fabric coverings and light locks.
Label troughs are not an area that would seem to be terribly innovative, but if you think about it, most labels are either on walls or on the sides of cases. There is also the variation of having a label installed on an angled deck inside the case. Though it has its advantages, I always felt that having angles above the collar line read too much with the artwork and changed the shape of the casework. My solution was to sink the label rail into a trough below the deck and collar line. This retains the casework’s squareness, doesn’t compete with the shape of the artwork, and perhaps surprisingly is very easy to read especially through reflection-free Optium.
Together these three advances in casework design give Connecting Cultures a state-of-the-art look and feel.
Article printed from bloggers@brooklynmuseum: https://www.brooklynmuseum.org/community/blogosphere
URL to article: https://www.brooklynmuseum.org/community/blogosphere/2012/05/15/advances-in-exhibition-casework/
URLs in this post:
 last post: http://www.brooklynmuseum.org/community/blogosphere/2012/05/02/the-big-pictures/
 Connecting Cultures: http://www.brooklynmuseum.org/exhibitions/connecting_cultures/
Copyright © 2010 bloggers@brooklynmuseum. All rights reserved.