On View: Luce Visible Storage and Study Center, 5th Floor
Overall: 5 1/8 x 4 7/8 x 5 in. (13 x 12.4 x 12.7 cm)
Height to top of reservoir (excluding feed tubes): 3 3/4 in. (9.5 cm) (show scale)
Impressed on underside, in center of base: rectangular stamp with serrated edge containing "ENDICOTT / & / SUMNER" above a smaller rectangular stamp with "N[Y]" (the "Y" is obscured by gouge mark)
Gift of Mrs. Samuel Doughty
You may download and use Brooklyn Museum images of this three-dimensional work in accordance with a Creative Commons license
. Fair use, as understood under the United States Copyright Act, may also apply.
Please include caption information from this page and credit the Brooklyn Museum. If you need a high resolution file, please contact email@example.com
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact firstname.lastname@example.org
Endicott and Sumner. Lamp, 1846-1851. Pewter, Overall: 5 1/8 x 4 7/8 x 5 in. (13 x 12.4 x 12.7 cm). Brooklyn Museum, Gift of Mrs. Samuel Doughty, 27.522. Creative Commons-BY
overall, 27.522_bw.jpg. Brooklyn Museum photograph
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
Pewter swinging oil lamp. Saucer-like base rises in center to flat-toped dome that supports a U-shaped bracket. Reservoir shaped like upside-down pear hangs from this bracket and swivels on pins. Flat round top screws into round mouth at top of reservoir. Two copper feed tubes project from top, each has conical cap attached by metal chain. Ringed finger grip soldered to inside edge of saucer base for carrying; narrow copper wire ring attached to opposite, outer side of base for hanging.
CONDITION: Good; allover scratches; gouges around mouth of reservoir and edge of top.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.