30 1/4 x 22 x 22 1/2 in. (76.8 x 55.9 x 57.2 cm) (show scale)
This item is not on view
Gift of David A. Hanks
You may download and use Brooklyn Museum images of this three-dimensional work in accordance with a Creative Commons license
. Fair use, as understood under the United States Copyright Act, may also apply.
Please include caption information from this page and credit the Brooklyn Museum. If you need a high resolution file, please fill out our online application form
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact firstname.lastname@example.org
William Katavalos. "T" Chair, ca. 1950-1953. Metal, leather, 30 1/4 x 22 x 22 1/2 in. (76.8 x 55.9 x 57.2 cm). Brooklyn Museum, Gift of David A. Hanks, 82.2. Creative Commons-BY (Photo: Brooklyn Museum, 82.2_bw.jpg)
overall, 82.2_bw.jpg. Brooklyn Museum photograph
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
T-chair, resting on three legs of chromed tubular steel, each ending at the ground with a disk of black rubber sandwiched between a copper disk (above) and a brass plated flattened bun (below). Three legs are joined by a T-shaped metal stretcher painted black and formed by two pieces of 3/8" metal 2" wide, welded together and to the legs. Rear leg terminates at chair's crest where it joins a slightly curved solid cylinder bar of metal, painted black, which forms the crest. Crest rail is split in two and the leather back is rolled between the split and held in place with screws. Two front legs terminate at seat sides where they join 9 1/4" cylinder bars of metal, painted black and split in two. Leather seat sides are rolled between split bars and held in place with screws. Seat and back of chair are formed by a single piece of T-shaped brown leather, slung between the metal bars at tops of legs. Front of seat is re-enforced with extra strip of leather. The stretcher, seat rails, front legs, crest rail, back leg, and slung leather are all T-shaped.
CONDITION: Leather somewhat scratched and scuffed throughout, but good. Brass bun feet corroded. Some chipping of black paint on bars at crest and sides of seat.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.