Desk Lamp, Model #114
On View: Luce Visible Storage and Study Center, 5th Floor
12 3/4 x 11 1/2 x 10 1/4 in. (32.4 x 29.2 x 26 cm) (show scale)
H. Randolph Lever Fund
You may download and use Brooklyn Museum images of this three-dimensional work in accordance with a Creative Commons license
. Fair use, as understood under the United States Copyright Act, may also apply.
Please include caption information from this page and credit the Brooklyn Museum. If you need a high resolution file, please contact firstname.lastname@example.org
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact email@example.com
Walter Dorwin Teague (American, 1883-1960). Desk Lamp, Model #114, ca. 1939. Aluminum, plastic, 12 3/4 x 11 1/2 x 10 1/4 in. (32.4 x 29.2 x 26 cm). Brooklyn Museum, H. Randolph Lever Fund, 82.168.1. Creative Commons-BY (Photo: Brooklyn Museum, 82.168.1_bw.jpg)
overall, 82.168.1_bw.jpg. Brooklyn Museum photograph
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
Desk lamp, Model #114. Low, hemispherical brown plastic (bakelite?) base with a cylindrical metal switch at the front and the lamp stem at the rear; wire cord attached through bottom rear of base. Stem is an aluminum cone tapering out from bottom, rising at a slight angle; four vertical slots at bottom rear of stem. Top of the stem is an irregularly shaped half circle punctured with circles and four screws with plastic heads that attach to the shade. Brown plastic shade in general shape of three-dimensional isosceles trapezoid with basically straight sides but rounded on all edges, and widest at the front. Shade slopes downward on top toward the front. Center of shade is slightly raised with four slots for ventilation along the rear and two on each side of the raised section. Interior of shade is spray-painted white and has two metal reflectors, curved one at back and flat one on inside top; underside covered with a thin, soft piece of green or brown plastic, held in place by a wire frame (intended to produce glare-free light).
CONDITION: Wear to all surfaces but overall condition good. Lamp was rewired and is in working condition. Most significant damage is a small triangular chip to rear of shade, about 2 14" long. Aluminum surface of the stem apparently covered with some type of protective lacquer which has worn off in many spots and shows discoloration; there is also a stain near top. Parts of the stem surface are crazed, generally dirty. The top with various minor scuffs and scratches. Thin hair-line crack on back of shade, running diagonally from left-most vent to lower leaf of rear, about one inch long.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.