"Blongo" Side Chair
On View: Luce Visible Storage and Study Center, 5th Floor
27 1/8 x 15 x 17 1/2 in. (68.9 x 38.1 x 44.5 cm) (show scale)
Signed on underside of base in pencil, in script: "Leo Black[...] #2"
H. Randolph Lever Fund
You may download and use Brooklyn Museum images of this three-dimensional work in accordance with a Creative Commons license
. Fair use, as understood under the United States Copyright Act, may also apply.
Please include caption information from this page and credit the Brooklyn Museum. If you need a high resolution file, please fill out our online application form
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact firstname.lastname@example.org
Leo Blackman (American, born 1956). "Blongo" Side Chair, ca. 1984. Birch plywood, 27 1/8 x 15 x 17 1/2 in. (68.9 x 38.1 x 44.5 cm). Brooklyn Museum, H. Randolph Lever Fund, 85.161. Creative Commons-BY (Photo: Brooklyn Museum, 85.161.jpg)
overall, 85.161.jpg. Brooklyn Museum photograph, 2004
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
Fancifully shaped, low side chair in natural finish, cut out birch plywood. The chair is composed of separately articulated parts all fitted together: rear legs/back unit, seat, and two front legs. Rear legs/back unit has horizontal cylinder at top (forms a back support); two closely spaced, parallel pieces of wood extend from this cylinder to the floor; their front edge is straight above the seat, bulges out below the seat (forming a little shelf which helps to support the seat), and then curves back inward to the floor; their back edge slopes gently from the cylinder then straightens out at bottom. These two parallel pieces are joined by horizontal members evenly spaced between the cylinder and seat (open below seat to form two closely spaced rear legs). Seat has straight edge across front, then curves to side and rear (forming "U"). In profile elevation, the two front legs are shaped like trapezoids with top (under seat) wider than bottom (foot), and straight side along front and angled side at back. Stretchers and legs support seat. When the rear legs/back unit is viewed obliquely from the rear, it resembles a Cubist violin or guitar: the cylinder and upper portion resemble the scroll and neck and fingerboard of a violin; the bottom portion resembles a section from the body of the instrument. This unit also has anthropomorphic qualities, looking like a schematized spine with vertebrae.
CONDITION: Some minor chips to front plywood edges of rear-leg/back unit. Thin coat of polyurethane (?) finish to wood.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.