On View: Luce Visible Storage and Study Center, 5th Floor
32 x 21 3/8 x 22 1/2 in. (81.3 x 54.3 x 57.2 cm) (show scale)
H. Randolph Lever Fund
You may download and use Brooklyn Museum images of this three-dimensional work in accordance with a Creative Commons license
. Fair use, as understood under the United States Copyright Act, may also apply.
Please include caption information from this page and credit the Brooklyn Museum. If you need a high resolution file, please contact email@example.com
For further information about copyright, we recommend resources at the United States Library of Congress
, Cornell University
, Copyright and Cultural Institutions: Guidelines for U.S. Libraries, Archives, and Museums
, and Copyright Watch
For more information about the Museum's rights project, including how rights types are assigned, please see our blog posts on copyright
If you have any information regarding this work and rights to it, please contact firstname.lastname@example.org
Donald Deskey (American, 1894-1989). Armchair, ca. 1933. Steel, vinyl, 32 x 21 3/8 x 22 1/2 in. (81.3 x 54.3 x 57.2 cm). Brooklyn Museum, H. Randolph Lever Fund, 85.164.1. Creative Commons-BY (Photo: Brooklyn Museum, 85.164.1_bw.jpg)
overall, 85.164.1_bw.jpg. Brooklyn Museum photograph
"CUR" at the beginning of an image file name means that the image was created by a curatorial staff member. These study images may be digital point-and-shoot photographs, when we don\'t yet have high-quality studio photography, or they may be scans of older negatives, slides, or photographic prints, providing historical documentation of the object.
Armchair of chrome-plated, square hollow steel frame and yellow vinyl upholstered seat and back cushion. The back and seat of the chair are a continuous, rectangular unit made of wood covered in vinyl and bent to support human body; seam in upholstery where seat and back meet; seat is sprung. This unit is supported by the metal frame: straight arms start midway down the side of the chair back then curve down to form the front legs; a horizontal seat rail joins the legs. Welded to the back of each front leg at the middle, a single piece extends back along the underside of the seat along the outer edge (supporting the seat), then curves downward to form shorter, angled rear leg. Tubular steel stretcher spans rear legs. Rectangular metal frame inset under seat.
CONDITION: Frame with minor pitting throughout, especially where sitter's hands touch. Scratches throughout, especially lower legs. Joints and corners dirty with minor corrosion. Inset frame unfinished except for exposed parts, worn. Vinyl upholstery on back and joints: small pen mark to front proper left of back.
Not every record you will find here is complete. More information is available for some works than for others, and some entries have been updated more recently. Records are frequently reviewed and revised, and we welcome
any additional information you might have.